Provide expert technical input to development projects by integrating real site-specific load insights. Prepare clear technical reports and documentation summarizing analyses and results. Support certification processes and claims investigations with deep technical understanding.
Prepare and conduct handover sessions to enable RPA/DPA experts from the business to take over maintenance and continuous improvement Properly document handover Perform code reviews As per four-eyes principle conduct code reviews of your colleagues’ implementations Provide detailed feedback Deliver status reports in project or team meetings Facilitate knowledge sharing within CoD & digitization community Share experience and document lessons learned Conduct Automation Academy onsite trainings Help further improving our methodology and align on best practices Support special CoD-relevant projects (i.e. technology exploration) In parallel to your project engagement, you may be involved into special projectsSpecial projects vary (i.e. exploring new technologies, certain methodology improvement initiatives, internal or external auditing, etc.)
YOUR TASKS: Support the QM on technical non-conformities and to ensure compliance with ‘Management of Change’ requirements for reporting, developing solutions and implementation Support the SM for Quality Gate 1 and incoming goods inspections Assist the SM, QM and Civil PE on pre-erection anchor cage and foundation checks Support the SM and QM with collating and checking for completeness, before releasing the Pre-erection documentation, Statutory Inspections and reports Organise and support the Gate 23 process with the SM and QM Collate the necessary information for reporting and managing NCRs and Incidents in UPVISE/Service Now or the prevailing software management tool Maintain close contact with QM for ordering and tracking missing parts and Requisition Notes (RNs) Resolving quality deviations (de-snagging) to ensure not only a smooth handover to the customer but also a smooth operation over the WT lifetime.
YOUR TASKS: Support the QM on technical non-conformities and to ensure compliance with ‘Management of Change’ requirements for reporting, developing solutions and implementation Support the SM for Quality Gate 1 and incoming goods inspections Assist the SM, QM and Civil PE on pre-erection anchor cage and foundation checks Support the SM and QM with collating and checking for completeness, before releasing the Pre-erection documentation, Statutory Inspections and reports Organise and support the Gate 23 process with the SM and QM Collate the necessary information for reporting and managing NCRs and Incidents in UPVISE/Service Now or the prevailing software management tool Maintain close contact with QM for ordering and tracking missing parts and Requisition Notes (RNs) Resolving quality deviations (de-snagging) to ensure not only a smooth handover to the customer but also a smooth operation over the WT lifetime.
Follow up and keep record of customs entries and checking against correct values in line with HMRC Import / Export compliance, including keeping the business compliant with all regulatory requirements. Create and update Shipping and On Time in Full (OTIF) reports Liaise with external transport companies to ensure accurate delivery times to all sites and keeping relevant internal stakeholders updated throughout.
Your Profile Bachelor’s degree in Computer Science, Information Technology, or a related discipline.At least 4 years of experience in CMDB administration and ITSM process management.Strong understanding of IT service management frameworks, particularly ITIL.Hands-on experience with Configuration Management in ServiceNow.Solid knowledge of IT infrastructure, network architecture, and databases such as Microsoft SQL.Proficiency in data analysis and the creation of reports and dashboards.Excellent problem-solving skills and the ability to work independently with a focus on priorities.Strong communication and interpersonal skills.Ability to effectively train and educate others.Enthusiasm for learning and exploring new topics.Proficiency in English.
. • Identify risks and contingencies and partner with project leader in problem solving and resolution efforts. • Report to and relate with Trial Leader to provide updates, exchange critical information and share trial conduction information, within regulatory and compliance burdens. • Participate in and actively drive organizational, quality and process improvement initiatives to commence future leading change.
Your Responsibilities: Supporting supply chain processes in the context of M&A integrations and tech transfers, including further development of processes Guiding and training junior specialists and coordinating cross-functional project teams Coordinating with internal and external partners and contract manufacturers to ensure smooth integration and efficient operations (e.g., in conference calls and on-site meetings) Ensuring product availability in key markets: Overall overview and monitoring of production, transport, or release status down to the warehouse Preparing and presenting decision-relevant analyses, reports, and recommendations for action to senior management. Presenting project progress and critical issues to steering committees Your Profile: Completed degree in business administration, engineering, or a comparable field Required professional experience: 5 years, ideally in the area of supply chain or project management Alternatively, you have experience in regulatory affairs, quality assurance, or pharmacovigilance You already have some experience in coordinating cross functional teams and complex projects You are characterized by analytical thinking and a structured and results-oriented approach to work You communicate and negotiate confidently in German and English and have a good working knowledge of MS Office; knowledge of SAP is an advantage Your way of working is proactive, solution-oriented and communicative Unser Angebot: A growing company with a diverse and open-minded working environment with employees from around 40 different countries Flexible working models adapted to your needs (e.g. up to 100% remote working and up to two months from abroad within the EU possible), working time account with time off in lieu, 30 days' holiday Flexible benefits budget that you can use according to your individual preferences, such as a higher employer contribution to the company pension scheme, fitness & health offers or subsidies for travel or meal costs.
Location: Mobile Work (Mexico) What you’ll do Lead the charge: Manage cross-functional teams to deliver software into major retail environments Be the face: Build strong customer relationships as the main contact throughout the project lifecycle Keep it agile: Support Agile processes and enable smooth development execution Own the numbers: Manage budgets, forecasts, and invoicing with precision Stay ahead: Report on status, risks, and financials across stakeholder levels Solve smart: Resolve issues, ensure quality, and keep projects on time and on budget What you bring A degree in Computer Science, IT, or a related field Strong experience in the Central/Latin America`s retail market, experience in IT/software projects; POS background is a plus Proven success in managing customer-facing projects, including budgeting and contracts Strong communication skills and confidence in stakeholder management Team-oriented, creative in problem-solving, and adaptable to dynamic environments Fluent in English Willingness to travel and take your expertise global
YOUR TASKS • You draft and negotiate commercial and procurement contracts with international suppliers • You provide adhoc legal advice on agreements such as real estate leases, equipment leases or research and development cooperation agreements • You prepare and maintain standard templates, forms and internal legal guidelines • You deliver legal in‑house training for procurement and technical teams • You support cross‑border collaboration within the Global Procurement legal team • You report directly to the Legal Director Global Procurement in Pamplona YOUR PROFILE • You are fully qualified to practise law in Germany with strong academic credentials • You bring at least five years of experience in private practice or in-house, ideally in construction, engineering or the energy sector • You have experience working with commercial contracts in an international environment • You communicate clearly and negotiate confidently, with strong organisational skills • You are fluent in English, German and ideally one additional European language • You have experience in risk and claim management or are willing to build this knowledge • You are open to occasional international travel YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS Receive materials and verify delivery documentation (delivery notes, invoices, shipment volumes) Carry out physical and system-based checks to ensure accuracy, quality, and compliance of goods Load and unload trucks in a safe, efficient, and compliant manner Organize, monitor, and maintain comprehensive inventory records Complete and update logistics control spreadsheets and reports on a daily basis Support administrative logistics processes and associated documentation Communicate with suppliers, carriers, and internal stakeholders in both German and English YOUR PROFILE Completed secondary education; a technical qualification in Logistics is an advantage Previous experience in logistics, warehouse, or supply chain operations Confident handling of Excel and/or ERP systems Fluent in English; German at a working proficiency level (B2+) is a plus Basic understanding of safety regulations and operational procedures Strong organizational skills with high attention to detail Structured, process‑oriented, and reliable working style Proactive mindset with the ability to work effectively in a multicultural, team‑oriented environment Please note: The position is based at our Buffer Yard in Wathlingen (area of Celle) YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS Implement quality methodologies and procedures at the buffer yards, ensuring strict adherence to the quality control plan Supervise the proper execution of various subprocesses at the buffer yards Inspect incoming components such as concrete tower segments and tower internals Conduct audits on the installation of tower internals within stored tower segments Perform final inspections of the concrete tower before handing over to the Project Management organization Identify, document, and manage non-conformities arising during storage at the buffer yards Report daily on the progress and quality status of construction activities Participate in cross-functional meetings within the concrete tower structure to support project execution Coordinate tasks and activities at the buffer yards with the global quality team YOUR PROFILE Completed vocational training in a technical field (e.g. construction materials testing, concrete technology, or similar); further qualification as a certified technician in civil engineering or quality management is an advantage Experience with concrete and/or quality procedures is an asset English proficiency at B2 level and strong communication skills German proficiency at C1 level Team-oriented mindset YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Monitoring & Analysis Monitor applications and infrastructure using tools.Analyze performance data, identify bottlenecks, and recommend improvements.Create dashboards and KPI reports. Maintenance & Administration Perform regular maintenance for OT applications.Maintain master data based on service requests.Manage Kubernetes deployments and scaling.Ensure compliance with IT/OT security standards.
YOUR TASKS Receive materials and verify delivery documentation (delivery notes, invoices, shipment volumes) Carry out physical and system-based checks to ensure accuracy, quality, and compliance of goods Load and unload trucks in a safe, efficient, and compliant manner Organize, monitor, and maintain comprehensive inventory records Complete and update logistics control spreadsheets and reports on a daily basis Support administrative logistics processes and associated documentation Communicate with suppliers, carriers, and internal stakeholders in both German and English YOUR PROFILE Completed secondary education; a technical qualification in Logistics is an advantage Previous experience in logistics, warehouse, or supply chain operations Confident handling of Excel and/or ERP systems Fluent in English; German at a working proficiency level (B2+) is a plus Basic understanding of safety regulations and operational procedures Strong organizational skills with high attention to detail Structured, process‑oriented, and reliable working style Proactive mindset with the ability to work effectively in a multicultural, team‑oriented environment Please note: The position is based at our Buffer Yard in Wathlingen (area of Celle) YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS • You draft and negotiate commercial and procurement contracts with international suppliers • You provide adhoc legal advice on agreements such as real estate leases, equipment leases or research and development cooperation agreements • You prepare and maintain standard templates, forms and internal legal guidelines • You deliver legal in‑house training for procurement and technical teams • You support cross‑border collaboration within the Global Procurement legal team • You report directly to the Legal Director Global Procurement in Pamplona YOUR PROFILE • You are fully qualified to practise law in Germany with strong academic credentials • You bring at least five years of experience in private practice or in-house, ideally in construction, engineering or the energy sector • You have experience working with commercial contracts in an international environment • You communicate clearly and negotiate confidently, with strong organisational skills • You are fluent in English, German and ideally one additional European language • You have experience in risk and claim management or are willing to build this knowledge • You are open to occasional international travel YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS Implement quality methodologies and procedures at the buffer yards, ensuring strict adherence to the quality control plan Supervise the proper execution of various subprocesses at the buffer yards Inspect incoming components such as concrete tower segments and tower internals Conduct audits on the installation of tower internals within stored tower segments Perform final inspections of the concrete tower before handing over to the Project Management organization Identify, document, and manage non-conformities arising during storage at the buffer yards Report daily on the progress and quality status of construction activities Participate in cross-functional meetings within the concrete tower structure to support project execution Coordinate tasks and activities at the buffer yards with the global quality team YOUR PROFILE Completed vocational training in a technical field (e.g. construction materials testing, concrete technology, or similar); further qualification as a certified technician in civil engineering or quality management is an advantage Experience with concrete and/or quality procedures is an asset English proficiency at B2 level and strong communication skills German proficiency at C1 level Team-oriented mindset YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Scrum, Wasserfall) gewährleistest du darüber hinaus eine optimale Organisation der ProjekteAbschließend reportest du in regelmäßigen Abständen den Projektfortschritt und stellst bei Projekterfolg eine saubere Übergabe an das Service- und Operationsteam sicher Gute Voraussetzungen für deinen Erfolg: Du verfügst über ein abgeschlossenes Studium der (Wirtschafts-)Informatik oder eine vergleichbare QualifikationDarüber hinaus hast du bereits Erfahrung im IT- Projektmanagement sammeln könnenEntsprechende Zertifizierungen (SCRUM, PMP, IPMA, Prince2) sind ebenfalls von VorteilDu verfügst über die Bereitschaft, dich gelegentlich (ca. 1x im Monat) mit deinen Kollegen in Nürnberg on-site zum persönlichen Austausch zu treffenSehr gute Deutsch- und gute Englischkenntnisse runden dein Profil ab Wie geht es weiter?
YOUR TASKS You consistently implement HSE and safety requirements on site and intervene decisively in case of violations You provide technical supervision of contracted companies during the execution of electrical installations on wind turbines You ensure required quality and output levels and immediately initiate corrective actions in case of deviations You ensure timely completion of electrical works to enable proper commissioning of the wind energy installation You review system-related reports for completeness, accuracy, and up-to-date technical documentation You actively participate in project and site meetings and contribute your expertise as Electrical Supervisor You record defective or missing components and promptly communicate requirements to the site management YOUR PROFILE Completed vocational training as an electrician, mechatronics technician, or an equivalent technical qualification Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work High willingness to travel mainly within Germany and occasionally to Austria and the Netherlands Fitness for working at heights, confined working spaces, good physical condition, and a strong safety-oriented mindset Solid PC skills, especially in MS Office and handling technical documentation Good command of English, both written and spoken, for international cooperation Valid driving license class B and a structured, resilient, and solution-oriented working style YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS You consistently enforce HSE and safety requirements on site and intervene immediately in case of deviations You provide technical coordination and supervision of external contractors during mechanical installation activities You ensure quality, quantity, and compliance of installation work and initiate corrective actions when requirements are not met You ensure timely completion of work as the basis for proper commissioning of the wind turbine systems You review turbine-related reports and documentation for completeness, accuracy, and up-to-date status You actively participate in project and site meetings and contribute your expertise as a Mechanical Supervisor You identify missing or defective components and promptly report requirements to the site management YOUR PROFILE Completed technical vocational training, for example as a mechatronics technician or industrial mechanic, or an equivalent qualification gained through long-term experience in the wind energy sector Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work High willingness to travel mainly within Germany, with occasional assignments in Austria and the Netherlands Medical fitness for working at heights as well as confined working space and good physical condition for work on wind turbines Confident PC user skills, especially in MS Office Good command of English, both written and spoken, for collaboration in international teams High resilience, structured problem-solving skills, and clear, transparent communication Valid driving license class B We provide the opportunity for further qualification as an industrial electrician.
YOUR TASKS You consistently enforce HSE and safety requirements on site and intervene immediately in case of deviations You provide technical coordination and supervision of external contractors during mechanical installation activities You ensure quality, quantity, and compliance of installation work and initiate corrective actions when requirements are not met You ensure timely completion of work as the basis for proper commissioning of the wind turbine systems You review turbine-related reports and documentation for completeness, accuracy, and up-to-date status You actively participate in project and site meetings and contribute your expertise as a Mechanical Supervisor You identify missing or defective components and promptly report requirements to the site management YOUR PROFILE Completed technical vocational training, for example as a mechatronics technician or industrial mechanic, or an equivalent qualification gained through long-term experience in the wind energy sector Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work High willingness to travel mainly within Germany, with occasional assignments in Austria and the Netherlands Medical fitness for working at heights as well as confined working space and good physical condition for work on wind turbines Confident PC user skills, especially in MS Office Good command of English, both written and spoken, for collaboration in international teams High resilience, structured problem-solving skills, and clear, transparent communication Valid driving license class B We provide the opportunity for further qualification as an industrial electrician.
YOUR TASKS You consistently implement HSE and safety requirements on site and intervene decisively in case of violations You provide technical supervision of contracted companies during the execution of electrical installations on wind turbines You ensure required quality and output levels and immediately initiate corrective actions in case of deviations You ensure timely completion of electrical works to enable proper commissioning of the wind energy installation You review system-related reports for completeness, accuracy, and up-to-date technical documentation You actively participate in project and site meetings and contribute your expertise as Electrical Supervisor You record defective or missing components and promptly communicate requirements to the site management YOUR PROFILE Completed vocational training as an electrician, mechatronics technician, or an equivalent technical qualification Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work High willingness to travel mainly within Germany and occasionally to Austria and the Netherlands Fitness for working at heights, confined working spaces, good physical condition, and a strong safety-oriented mindset Solid PC skills, especially in MS Office and handling technical documentation Good command of English, both written and spoken, for international cooperation Valid driving license class B and a structured, resilient, and solution-oriented working style YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Support the Patient Services Manager (PSM) with administration of the monthly cryo billing reports and review of the month-end deferred revenue/income list. Managing all ICB quality queries and reporting monthly, quarterly, 6 monthly and annually as per the schedules for each ICB.
YOUR TASKS Make sure that the supplier or partner look after the production cycle under the standards, deadlines and planning established by the company with effective operations and cost factors Manage and support all Nordex local teams so they could succeed in each area Ensure the supply of raw material for production with Nordex scope, as well as logistics and purchasing areas Supervise all suppliers' material stocks to prevent damaged or defective inventory Coordination of production activities with procurement, maintenance, and quality control activities to obtain optimum production and utilization of human resources, machines, and equipment Plan follow up of the factory’s progress, production improvement and general growth Prepare daily, weekly and monthly reports of production -, maintenance, cost control, operations; to analyze them and see if business objectives are achieved, if government obligations are met or identify and resolve any issues Develop training, teaching, development and work practice plans for workers Be able to manage and coordinate different teams.
YOUR TASKS Make sure that the supplier or partner look after the production cycle under the standards, deadlines and planning established by the company with effective operations and cost factors Manage and support all Nordex local teams so they could succeed in each area Ensure the supply of raw material for production with Nordex scope, as well as logistics and purchasing areas Supervise all suppliers' material stocks to prevent damaged or defective inventory Coordination of production activities with procurement, maintenance, and quality control activities to obtain optimum production and utilization of human resources, machines, and equipment Plan follow up of the factory’s progress, production improvement and general growth Prepare daily, weekly and monthly reports of production -, maintenance, cost control, operations; to analyze them and see if business objectives are achieved, if government obligations are met or identify and resolve any issues Develop training, teaching, development and work practice plans for workers Be able to manage and coordinate different teams.
Planning and coordination of hardware tests Ensuring timely availability of materials, equipment, and internal resources Continuous communication with all stakeholders and clarification of technical open points Preparation of test summaries, status reports, and management presentations Preparation for and support during program reviews Technical background (Mechanical Engineering or Systems Engineering) Experience in project management and test coordination Very good English skills (documents & meetings predominantly in English) – mandatory Experience working in cross-functional environments High level of proactivity, structured working style, and strong communication skills Experience in hardware test environments related to process engineering or chemical plant systems Understanding of test materials and lab logistics Proficiency in MS Office required Support throughout the entire application process Ihr Kontakt Ansprechpartner Patrick Thomas Marolt Referenznummer 863776/1 Kontakt aufnehmen E-Mail: patrick.marolt@hays.at Anstellungsart Freiberuflich für ein Projekt
Roles & Responsibilities Support the tender team in bid projects by planning and calculation of integration and testing tasks Coordinate C&P software development process from project start up to the final customer acceptance tests ensuring compliance with all relevant system requirements: Set up and follow consistent requirements engineering throughout the project Guide a team of software engineers through the software development and integration phase Define acceptance tests in close collaboration with our customers and internal stakeholders Coordinate execution of offsite and on-site acceptance tests, create test reports and track open points in close collaboration with our customers and internal stakeholders Track development and test progress and report to project management on a regular basis Promote a model-based engineering approach and support an efficient use of X-in-the-loop environments to achieve project goals in terms of time and quality Required Skills Bachelors Degree in Electrical Engineering Fluency in English, both in writing and speaking, is necessary.
Mein Arbeitgeber Candidate location: US (preferably EST, CT, or MT time zones)For one of our clients, we are currently looking for a JUNIOR PMO (m/f/d) to support ongoing IT infrastructure initiatives within a global program The assignment focuses on project coordination, documentation, stakeholder communication, and supporting project management activities in a fully remote setup Support the PMO team across ongoing IT infrastructure projectsPrepare and maintain project documentation, reports, and presentationsCoordinate tasks, timelines, and project activitiesCommunicate proactively with stakeholders and team membersWork independently with minimal supervisionUse MS Project, Word, Excel, and PowerPoint for project support tasksListen to direction, act proactively, and adapt quickly to changing priorities Experience with MS Project and other MS Office toolsUnderstanding of IT Infrastructure environmentsProject coordination or PMO experience (Junior level)Experience working with ServiceNowIndependent and proactive working styleStrong communication skills Project language: EnglishRemote option Ihr Kontakt Referenznummer 863292/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Freiberuflich für ein Projekt
Independently manage a team of cross-function automation process analystsYearly target setting and reviewCoordinate project engagements according to defined digitization roadmapSupport and coach team members, i.e. review the work results and provide feedbackSupport people development activities (e.g. observe team members, identify improvement potentials and support shaping individual career development)Accountable for standard setting and shaping best practicesFurther develop standards for process documentation, optimization & digitization, automation potential estimation, incorporation of new technologies into our technology stack, etc.Observe the software market for process automation, analyze new potential, and define use casesSupport or fully manage digitization projects according to agile methodology depending on size and complexity (for larger and more complex projects there will be a dedicated project manager)Be an advocate for agile project management methodology (empower business functions to fulfil their roles; e.g. product owner)Define initial product backlog in collaboration with the product owner and process expertsWrite user stories for all project activities and estimate efforts in collaboration with process experts and automation designer(s)Define sprint cycles and plan sprintsPlan, host, manage, and document sprint review meetings (derive backlog for next sprint)Manage a reasonable scope, considering cost & benefitsPrepare status reports and present in team meetingsFacilitate daily stand-ups for project teamIndependently design digital processes with medium to high complexityIndependently check existing process documents and revise/provide details together with process experts, considering best practices (BPMN 2.0)Independently analyze processes with regard to their automation potentialIndependently optimize processes at task level and develop a digital target process in close coordination with automation designersPresent process design to senior stakeholdersEnsure buy-in of key stakeholders (automation designer, process experts, process owner)Support the automation designers for the technical implementationProvide instructions to automation designer and assist during technical implementationSupport integration and user acceptance testIndependently define and perform test cases with process expertsSupport test coordination and create test documentationSupport go-live and hypercare phase (e.g. conduct trainings and provide coaching)Support change management activitiesPresent and communicate process changes in an understandable wayEnsure that users understand and take account of technical process changesEnsure and facilitate knowledge sharing within CoD & digitization communityShare experience and document lessons learnedFacilitate knowledge exchange sessionsSupport special CoD-relevant projects (i.e. technology exploration)Alongside your project engagement, you may be involved into special projects (i.e. exploring new technologies, certain methodology improvement initiatives, internal or external auditing, etc.)
Main Roles & Responsibilities of the Contract Support Administrator Understand, anticipate and delivery customer (internal and external) needs while building effective relationships.Managing and operating site CMMS systemRaising and chasing of supplier orders including dealing with supplier queries.Input engineers time sheets onto the relevant systems.Compiling of Customer Weekly, Monthly and Annual Reports, and other reports as required to enable the Company to fulfil its contractual obligations.Produce quotations in the required format and in line with agreed process.Updating and uploading information to the client’s systems as required in a timely manner.Liaison with the operations team from engineer to director level.Raising of work orders in a timely and accurate manner and chasing old work orders to ensure closure.
Check the correct pre-assembly of the tower internals in the concrete segments Conduct audits of the preassembly and assembly phases of the concrete towers Perform the final inspections of the concrete tower prior to the handover to the PM organization Detect, open and manage the non-conformities opened during the construction phase Check the quality methods and documentation used by the subcontractors on site Report on the daily progress of the status of the construction activities in terms of quality Participate in meetings with other areas within the concrete tower structure to ensure execution of the project Coordinate with the global quality team in terms of tasks and activities on site YOUR PROFILE Certificate of Higher Education in Engineering or similar Experience in Construction, experience with wind turbine assembly and construction activities desirable.
The scope of the role is the BaronieGroup with specific emphasis on Germany, Poland, Switzerland and Belgium. In your role, youwill report to our Head of Sustainability and work closely together with the other members of the sustainability team based in Europe and Cote d’Ivoire.
Own and continuously improve the sorting & ranking logic by balancing commercial KPIs (e.g. conversion, revenue, margin), customer relevance, and operational constraints Work data-driven, leveraging A/B testing, reports, and analyses to derive actions that are truly oriented towards customer needs and business impact Collaborate closely with Data Science and Engineering to implement scalable, performant, and AI-supported ranking solutions Manage and communicate with all relevant stakeholders across Business, Tech, and Analytics Translate stakeholder demands, commercial goals, and operational requirements into actionable and scalable product solutions Triage operative issues, identify technical dependencies, and evaluate business impact Lead cross-team initiatives and collaborate closely with other Tech Teams (e.g.
Key Responsibilities: ·Provides specialized administrative support in the development, implementation, and marketing of our two HR development programs ·Serves as a central point of contact between prospective employees, vendors, staff, other departments, and/or external constituencies on day-to-day operational, and administrative matters; assists with meetings, special projects, and/or general problem resolution ·Coordinates activities and administration of program objectives; this requires engaging internal and external stakeholders ·Monitors and administers program/project expenses; may develop or participate in the development of funding proposals for the program ·Writes, edits, and coordinates development of course catalogs, promotional materials, educational materials, training manuals, newsletters, and/or brochures, as appropriate to the program ·Maintains program/project records, researches information and gathers and computes various data; prepares special and/or one-time reports, summaries, or replies to inquiries, selecting relevant data from a variety of sources. ·Performs miscellaneous job-related duties as assigned Skills / Requirements: ·Sophomore, Junior, or Senior level college student seeking an HR degree ·Advanced knowledge of Microsoft Office Suite (Outlook, Word, Excel, and PowerPoint) ·Very strong presentation and communication skills ·A very motivated individual who takes initiative and can work independently with minimal supervision ·Strong multi-tasker with ability to take direction from multiple sources WHY JOIN our DHL team?
Check the correct pre-assembly of the tower internals in the concrete segments Conduct audits of the preassembly and assembly phases of the concrete towers Perform the final inspections of the concrete tower prior to the handover to the PM organization Detect, open and manage the non-conformities opened during the construction phase Check the quality methods and documentation used by the subcontractors on site Report on the daily progress of the status of the construction activities in terms of quality Participate in meetings with other areas within the concrete tower structure to ensure execution of the project Coordinate with the global quality team in terms of tasks and activities on site YOUR PROFILE Certificate of Higher Education in Engineering or similar Experience in Construction, experience with wind turbine assembly and construction activities desirable.
Reviews production schedules, work orders, engineering specifications, and related information to estimate manufacturing costs, design cost saving methods, and determine the effects of process changes on costs and quality; provides reports for management review, action, and control. Creation and maintenance of work instructions Works to reduce working capital by implementing methods and systems to ensure a more effective and efficient level of inventory.
Aufgaben Managing Sales development in dedicated Sales Area in PolandCoordinating tenders for customersPreparing and submitting reportsDeveloping reports on the results of the negotiations and meetings held with customersTaking part in meetings in factories and on all kinds of fairs and seminarsCoordinating commercial, service and engineering activities with customersConducting market analysis and finding new sales opportunitiesTeaching about Calvatis product innovations and technological solutions; taking part in qualifications raising trainingTechnological and consulting visits – within the scope of contract with a customerContribution to improvement of processes in territoryAssuring timely payments from customersCreating annual sales and service plan Anforderungen Master or bachelor’s degree (preferred: food technology, technical, chemistry)Previous sales experience in B2B sales highly desiredKnowledge of the market of professional cleaning and equipment is a big plusIntermediate PC skillsGood English or/and German skills (speaking and writing)Full driving license BWillingness to travel within Poland and stay in hotels 3-4 nights per week is unavoidableFriendly and courteous appearanceIndependent time/appointment managementQuick learner, structured work, Loyalty to customers and employersWell-organized with excellent multi-tasking abilitiesReliability, resilience and flexibilityTeamwork and communication skills Über uns Adequate and performance-based incomeAttractive yearly bonusCompany carGeat assistance in the back office at HQTrainings in Poland and abroadMobile communicationA long-ranging employmentCareer advancement with further education opportunitiesPleasant working environment with flat hierarchies and short decision Calvatis GmbH - motivated employees with expertise and passion who together make up the success of the company.
SVD National Key Account Manager As a SVD National Key Account Manager, your mission is to [briefly describe the main mission]. You will report to [add Hiring Manager title]. You will To be in charge of Scientific vacuum division Key accounts of China in R&D and ANA , and responsible for the sales result of this kind of business.Identify the tailored strategy and long term cooperation of every defined Key Account customers and report to her/his manager.Follow up the full process of Key Account inquiry.
Reviews production schedules, work orders, engineering specifications, and related information to estimate manufacturing costs, design cost saving methods, and determine the effects of process changes on costs and quality; provides reports for management review, action, and control. Creation and maintenance of work instructions Works to reduce working capital by implementing methods and systems to ensure a more effective and efficient level of inventory.
YOUR TASKS Coordinate and monitor the progress of subcontractors and report regularly to the BOP Manager and other stakeholders Ensure timely project completion by continuously tracking schedules and adjusting plans to prevent delays Enforce safety regulations and building codes through regular inspections and identification of hazards or violations Ensure all construction activities comply with approved plans, specifications, permits, and applicable standards Implement, supervise, and ensure compliance with the Quality Control Plan (QCP), including verification of completed work units and required testing Review construction procedures and resource requirements to meet design specifications and local/international standards Verify the foundation assembly process and act as a technical advisor during construction phases, applying defined quality procedures and stop points Identify and resolve issues during construction, verify subcontractor resources for correcting deviations, and review corrective procedures for compliance with QCP and regulations Maintain accurate documentation of project progress and quality control measures Communicate effectively with clients, contractors, and stakeholders to ensure project expectations are met YOUR PROFILE Degree in civil engineering or a related field; equivalent professional experience is also considered Experience in civil construction, ideally in wind energy projects and in supervisory roles Solid understanding of quality control procedures and local as well as international regulations Strong communication and leadership skills with the ability to guide and motivate teams Proven ability to resolve conflicts and conduct audits in construction environments Fluency in German and English (minimum B2–C1), both written and spoken Proficiency in project-related documentation and stakeholder interaction A valid driver’s license recognized in Germany is required for this position ADDITIONAL REQUIREMENTS The following valid certifications and safety trainings are required for this position: Working at Heights certification (issued within the last 12 months) First Aid training Fire Awareness training Confined Spaces training (due to work in the foundation pit) WILLINGNESS TO TRAVEL: You are ready to travel and work flexibly on-site according to project requirements.
Reporting to the Regional FCL Trade Management Manager, Oceania Trade, this role is responsible for:- OVERALL ROLE PURPOSE Assist in:- (Trade) Rate & surcharge negotiation with carriers for port-port rates and nominated accounts (Trade) Responding to tenders to clinch contracts from local, regional & global customers (Trade) Developing and maintaining relations with ocean freight carriers (Trade) Providing country guidance and support (GSC) Ensuring carrier contracts are updated correctly and timely into ocean freight buying system (GSC) Representing Asia Pacific countries in global meetings, consolidate feedback and suggestion to global team (GSC) Collaborating with GSC team to uphold the effect and efficiency of the performance in various tasks ACCOUNTABILITIES External - Customers - New and Existing Responsible for responding to tenders and RFQs to clinch contracts from regional and global customers Internal - Customers Trade Related Responsibilities Support and assist Regional FCL Trade Management Manager Oceania relater issues, e.g. Reports, presentations, market update, statistics, etc Regional Buying Negotiate competitive rates for FAK, named accounts & surcharges and buying incentives Establish country’s requested rates with carriers (for named accounts requests) Understand country’s needs and negotiate specific requirements with target carriers e.g. space protection / allocation , free time on demurrage and detention Develop and maintain relations with global ocean freight carriers with head offices in Asia Pacific; enhance local collaborations from regional perspective Space Management Set up space protection to align with annual budget and country requirements with carriers Monitor weekly lifting and monthly budget reports which shows countries’ performance and target carriers’ adherence and take timely corrective actions Prevent and resolve space & equipment issues Country OFR Organisations Assist countries in the areas of product and business development to achieve target carriers’ adherence Establish regular market information per trade to countries Support countries in the Asia Pacific on rates and carriers’ related issues e.g. space allocation, equipment issues, rates requests, etc Guide local offices in pricing strategy, market situation & processes.
YOUR TASKS Coordinate and monitor the progress of subcontractors and report regularly to the BOP Manager and other stakeholders Ensure timely project completion by continuously tracking schedules and adjusting plans to prevent delays Enforce safety regulations and building codes through regular inspections and identification of hazards or violations Ensure all construction activities comply with approved plans, specifications, permits, and applicable standards Implement, supervise, and ensure compliance with the Quality Control Plan (QCP), including verification of completed work units and required testing Review construction procedures and resource requirements to meet design specifications and local/international standards Verify the foundation assembly process and act as a technical advisor during construction phases, applying defined quality procedures and stop points Identify and resolve issues during construction, verify subcontractor resources for correcting deviations, and review corrective procedures for compliance with QCP and regulations Maintain accurate documentation of project progress and quality control measures Communicate effectively with clients, contractors, and stakeholders to ensure project expectations are met YOUR PROFILE Degree in civil engineering or a related field; equivalent professional experience is also considered Experience in civil construction, ideally in wind energy projects and in supervisory roles Solid understanding of quality control procedures and local as well as international regulations Strong communication and leadership skills with the ability to guide and motivate teams Proven ability to resolve conflicts and conduct audits in construction environments Fluency in German and English (minimum B2–C1), both written and spoken Proficiency in project-related documentation and stakeholder interaction A valid driver’s license recognized in Germany is required for this position ADDITIONAL REQUIREMENTS The following valid certifications and safety trainings are required for this position: Working at Heights certification (issued within the last 12 months) First Aid training Fire Awareness training Confined Spaces training (due to work in the foundation pit) WILLINGNESS TO TRAVEL: You are ready to travel and work flexibly on-site according to project requirements.
Transform complex datasets into clear, executive-level dashboards and reports to support business decisions. Maintain high-quality datasets through rigorous data cleaning, validation, and governance practices.
How you can contribute: Develop accurate forecasts and predictive models, identifying trends, seasonality, and variances.Transform complex datasets into clear, executive-level dashboards and reports to support business decisions.Maintain high-quality datasets through rigorous data cleaning, validation, and governance practices.Translate analytical insights into actionable strategic recommendations for stakeholders.Lead, motivate, and coordinate project teams across international locations.Organise and manage projects efficiently, including scheduling, resource allocation, and task prioritisation.Make timely, informed decisions under pressure, balancing risks and project objectives.Solve project challenges creatively and flexibly, adapting to unforeseen changes while maintaining progress.Communicate goals, expectations, and project status clearly to teams and stakeholders.
YOUR TASKS Support the Strategic Sourcing team on day-to-day operations Prepare and manage RFQs and support award processes Communicate with suppliers and support coordination Maintain and update data in SAP and related systems Conduct price and commodity analyses to support sourcing decisions Contribute to the improvement and enhancement of reports and Excel tools YOUR PROFILE Currently enrolled student (m/f/d) in a bachelor's or master's degree program in Industrial Engineering, Supply Chain or a comparable field Proficiency in MS Office (particularly Excel) and Power BI Strong analytical skills and a quick grasp of complex topics Proactive, structured, and solution-oriented working style Fluent in English (spoken and written); German is a plus Highly motivated, flexible, and a team player Availability to work on-site at our Hamburg office at least 2 days per week YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS Support the Strategic Sourcing team on day-to-day operations Prepare and manage RFQs and support award processes Communicate with suppliers and support coordination Maintain and update data in SAP and related systems Conduct price and commodity analyses to support sourcing decisions Contribute to the improvement and enhancement of reports and Excel tools YOUR PROFILE Currently enrolled student (m/f/d) in a bachelor's or master's degree program in Industrial Engineering, Supply Chain or a comparable field Proficiency in MS Office (particularly Excel) and Power BI Strong analytical skills and a quick grasp of complex topics Proactive, structured, and solution-oriented working style Fluent in English (spoken and written); German is a plus Highly motivated, flexible, and a team player Availability to work on-site at our Hamburg office at least 2 days per week YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Main Responsibilities:Internal Controls & CompliancePerform walkthroughs, documentation reviews, and basic control testing.Evaluate compliance with policies, procedures, and internal control standards.Track remediation efforts and follow-up on audit findings.Financial Audit SupportValidate financial data and review supporting documentation.Support audits of journal entries, reconciliations, and general ledger activity.Analyze variances, identify inconsistencies, and prepare audit summaries.Testing & DocumentationConduct sample testing against control expectations.Maintain organized audit workpapers per departmental standards.Document observations and assist in drafting preliminary findings.Process Evaluation & ImprovementReview business processes to identify risks, inefficiencies, and control gaps.Support evaluation of procedures for improvement opportunities.Collaborate with finance and operations teams to gather information and understand workflows.Data Review & ReportingAssist in preparing audit reports, dashboards, and status updates.Perform basic data analysis to identify patterns or anomalies.Support trend and report analysis across business lines.Customer / Stakeholder SupportCommunicate professionally with departments to obtain documentation and clarify information.Provide timely responses to audit-related inquiries.Other Duties as AssignedTo succeed, you will need Education Level Must be a Junior or Senior pursuing a degree in Accounting, Finance, Business Administration, Audit, or a related field at an accredited college or university.
Managing progress by tracking regulatory submissions, recruitment, case report form (CRF) completion, and data query resolution. Collaborating with experts at study sites and with client representatives. Mentoring of less experienced team members, support as subject matter expert for specific topics or additional tasks might be included.
Job description / Your role: Serve as the responsible project manager for customer programs, ensuring alignment with scope, timelines, and quality expectations Take a leading role in preparing technical and commercial proposals for customer projects Manage the planning and scheduling of projects, including allocation of resources, budgeting, and timeline control in accordance with established project management standards Assume full ownership of assigned projects, ensuring delivery on time, within budget, and to the highest quality standards Take responsibility for the risk management according to space standards Create and maintain comprehensive project documentation, including customer-facing documents and internal reports Plan, host, and manage internal and external project reviews to monitor progress and ensure stakeholder alignment Supervise and guide project team members, ensuring clear roles, responsibilities, and collaboration within the dedicated project team Join us in shaping the future of space technology, as we move from single-piece manufacturing to scalable, industrial production.
YOUR TASKS Monthly maintenance of replaced components and completeness check and update for new systems in the SAP system, including corresponding reports Database maintenance and updates Initial cross-departmental error analysis in the SAP system Support for project managers and IT with data queries for analysis and testing Creation and updating of training materials YOUR PROFILE Enrolled student (m/f/d) in a technical, business, or IT-related field Proficient in MS Office Good written and spoken English skills Strong analytical thinking skills Flexibility, excellent communication skills, and a good understanding of teamwork Independent and reliable work ethic Availability to work in our office in Hamburg regularly YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Job Title: Service Depot Repair Specialist Location: Concord Massachusetts Department: Service & Support Reports To: Depot Repair Manager ------ About Oxford Instruments Oxford Instruments is a leading provider of high-technology tools and systems for research and industry.